# Adding gps capacity

**URL:** <https://forum.clockworkpi.com/t/adding-gps-capacity/17174>\
**Category:** uConsole\
**Tags:** extension, expansion\
**Created:** [April 30, 2025, 8:08am UTC](https://forum.clockworkpi.com/t/adding-gps-capacity/17174 "2025-04-30T08:08:06Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![lszenss](https://avatars.discourse-cdn.com/v4/letter/l/85e7bf/32.png) [@lszenss](https://forum.clockworkpi.com/u/lszenss)\
**Post date:** [April 30, 2025, 8:08am UTC](https://forum.clockworkpi.com/t/adding-gps-capacity/17174/1 "2025-04-30T08:08:06Z")

</div>

Hi. I bought a second hand uconsole, without the extension board. Now, I would like to have at least a gps inside. But don’t want to spend 100 bucks in that. Do you have an advice ? Thanks

---

<div class="post-metadata">

**Author:** ![jutleys](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@jutleys](https://forum.clockworkpi.com/u/jutleys)\
**Post date:** [April 30, 2025, 8:48am UTC](https://forum.clockworkpi.com/t/adding-gps-capacity/17174/2 "2025-04-30T08:48:26Z")

</div>

4g module would be handy.

---

<div class="post-metadata">

**Author:** ![adcockm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/adcockm/32/1664_2.png) [@adcockm](https://forum.clockworkpi.com/u/adcockm)\
**Post date:** [April 30, 2025, 9:13am UTC](https://forum.clockworkpi.com/t/adding-gps-capacity/17174/3 "2025-04-30T09:13:27Z")

</div>

I don’t think anyone has designed an expansion board with only GPS. But there’s a discussion thread here that indicates there are some boards with LoRa and GPS:

> [@\[extension\] LoRa + GPS board](https://forum.clockworkpi.com/t/extension-lora-gps-board/10718/24):
>
> following up on this; one of the main reasons I got this thing was to use it with LoRaWAN.

As far as I know, Clockwork doesn’t sell the 4G expansion board separately anyway, although you could contact [alex@clockworkpi.com](mailto:alex@clockworkpi.com) and ask.

I’m not familiar with USB GPS options, but that may be a possibility too. With something like this expansion card, and maybe an adaptor, you may be able to find a small enough USB GPS unit and put it inside the uConsole case. Plus you’d gain three external USB ports. While I haven’t used it with GPS, I own one of these expansion boards and it works well.

> [@Internal mass storage device](https://forum.clockworkpi.com/t/internal-mass-storage-device/16179):
>
> Hello to all hackers! I recently bought this: I received it today, mounted and tested it successfully. It works both with CM4 and CM5 (not tested with CM3). I can connect my ssd to each type C port, the uConsole sees it every time. The interest of this extension is to have an internal port directly connected to CM4 (and CM5). The idea : Connect the ssd to this internal port to start on it directly, or boot on the SD card but have the entire system on the ssd. Here is the experimental setu…

---

<div class="post-metadata">

**Author:** ![Talos](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/talos/32/11104_2.png) [@Talos](https://forum.clockworkpi.com/u/Talos)\
**Post date:** [April 30, 2025, 10:29am UTC](https://forum.clockworkpi.com/t/adding-gps-capacity/17174/4 "2025-04-30T10:29:45Z")

</div>

I have one of these gps units wired to the internal usb. It works perfectly as a support when you place the uConsole on a desk too. Stops it wobbling when you type.  
The switch on the back turns on or off the power to both the gps and the sdr unit inside, so it’s not using power when not in use. Also so the sdr isn’t working when I have no antenna attached which won’t do it any good long term. Fitted a tiny blue LED on the side which lights when the sdr & gps are powered on.  
The switch placement was determined largely by internal space availability but actually ended up being perfect. In just the right place to switch with my forefinger but not in the way when I’m holding the unit and won’t get toggled accidentally.

Although the gps is working and streams satellite data I’ve not made use of it so far. Not sure what I’ll do with it yet. A future project.

With the uConsole being metal I do think gps needs to be external really or you’ll probably not have a great signal.

The satellite signal on this is great. Even though it’s facing down when you’re holding the uConsole.

 ![1000053507](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/d/de15d7d45ef309335f920b544dc99deff1a29fd0.jpeg)  
 ![1000053504](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/e/e961411b497e17c36d2f1f87b8eae517484e518e.jpeg)  
 ![1000053506](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/3/313ca6a1c53f8dcaf9fb8f9186d24a9ceca8567c.jpeg)

---

<div class="post-metadata">

**Author:** ![lszenss](https://avatars.discourse-cdn.com/v4/letter/l/85e7bf/32.png) [@lszenss](https://forum.clockworkpi.com/u/lszenss)\
**Post date:** [May 3, 2025, 7:04pm UTC](https://forum.clockworkpi.com/t/adding-gps-capacity/17174/5 "2025-05-03T19:04:46Z")

</div>

Thanks a lot ! I sent a message to Alex. He answered quickly and agreed to sell me this famous 4g board.
