# Bookworm 6.12.y for the uConsole and DevTerm **URL:** \ **Category:** uConsole\ **Tags:** devterm, cm3, uconsole, cm4, cm5\ **Created:** [February 27, 2025, 7:21pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847 "2025-02-27T19:21:59Z")\ **Posts on this page:** 20\ **Page:** 12
**Author:** ![DRC](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/drc/32/10892_2.png) [@DRC](https://forum.clockworkpi.com/u/DRC)\ **Post date:** [March 19, 2025, 6:40am UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/222 "2025-03-19T06:40:01Z")
Hello, forgive the dumb question. I have a uConsole with a CM5. Do I have to write a new SD image for every new release? I have a great setup now and would hate to start over. Can I install the latest release and keep my setup? ---
**Author:** ![Kirou](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/kirou/32/8936_2.png) [@Kirou](https://forum.clockworkpi.com/u/Kirou)\ **Post date:** [March 19, 2025, 7:27am UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/223 "2025-03-19T07:27:03Z")
It happens that I just have a CM3! @Rex, you are my hero! šŸ¤© ---
**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\ **Post date:** [March 19, 2025, 10:40am UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/224 "2025-03-19T10:40:53Z")
no, if you already have it all setup youā€™re good. everything will update, if you wanted to use a cm3 you would need to edit your config.txt to add the stuff for it or flash a new image. ---
**Author:** ![alpixdotro](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/alpixdotro/32/11107_2.png) [@alpixdotro](https://forum.clockworkpi.com/u/alpixdotro)\ **Post date:** [March 19, 2025, 11:02am UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/225 "2025-03-19T11:02:31Z")
Not sure itā€™s a good place to post, but found this site a while back: [https://www.farnell.com/](https://www.farnell.com/) They have a wide variety and stock for Raspberry Pi products, CM, Pi4,5, Pi Zero, Pico and so on. Maybe someone was looking for stock. ---
**Author:** ![Greg\_E](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@Greg\_E](https://forum.clockworkpi.com/u/Greg_E)\ **Post date:** [March 19, 2025, 7:26pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/226 "2025-03-19T19:26:17Z")
I just got done with my Devtermā€¦ Still no good. Tried Parrot Home, Security, and Bookworm with the cm3+. All I get is backlight on the display, If I leave it sitting long enough, the backlight goes out, roll the mouse and backlight returns. Part of it is working. I tried extending the partition in gparted to see if that might be an issue. Uncommented the Devterm line for each processor type, and comment out the uconsole for each. Double checked the config to make sure the changes stuck. The Clockwork image does work, but way out of date. Iā€™m thinking that my hardware may be from the first revision and that something strange is happening. None of the 6.x kernels have worked, they pretty much give the exact conditions, and I donā€™t remember hdmi working either. ---
**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\ **Post date:** [March 19, 2025, 7:51pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/227 "2025-03-19T19:51:06Z")
Ok let me make a change and build a new lite image for you to test. I think I know what it is. ---
**Author:** ![alpixdotro](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/alpixdotro/32/11107_2.png) [@alpixdotro](https://forum.clockworkpi.com/u/alpixdotro)\ **Post date:** [March 19, 2025, 8:07pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/228 "2025-03-19T20:07:58Z")
Hi everyone @Rex , I am running into an issue. I am using a 128 GB card on my uConsole with Bookworm 6.12.y. I recently installed PowerShell ( which obviously does not take up 128 GB ) and Iā€™m starting to get this error when I try to install a module: ![image](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/7/7f0474ba833590a8e6ea059279ecdfd42152f567.png) Not getting it when I perform for example: sudo apt update && sudo apt full-upgrade ![image](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/f/fcac57d7631a8baa0ef467380882a35bf835e962.png) Can anyone guide me to fix this ? Kind of confused. ---
**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\ **Post date:** [March 19, 2025, 8:09pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/229 "2025-03-19T20:09:17Z")
Iā€™m rebuilding the kernel with the panel driver clockwork used with their CM3 image. I had to rename it to not mess with the CM4/5 panel driver. If I gave you just the kernel could you make use of it to test or should I make a lite image for you to test? ---
**Author:** ![white-round-square](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/white-round-square/32/10385_2.png) [@white-round-square](https://forum.clockworkpi.com/u/white-round-square)\ **Post date:** [March 19, 2025, 8:10pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/230 "2025-03-19T20:10:16Z")
> [@alpixdotro](#): > > Not getting it when I perform for example: sudo apt update && sudo apt full-upgrade seems like your partition wasnā€™t extended, run `sudo raspi-config` and extend partition from there ---
**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\ **Post date:** [March 19, 2025, 8:10pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/231 "2025-03-19T20:10:49Z")
Sound like you need to expand your sd card. `sudo raspi-config` to do so. ---
**Author:** ![alpixdotro](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/alpixdotro/32/11107_2.png) [@alpixdotro](https://forum.clockworkpi.com/u/alpixdotro)\ **Post date:** [March 19, 2025, 8:13pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/232 "2025-03-19T20:13:34Z")
Just love this community. Thanks a bunch ! Fixed it. ---
**Author:** ![white-round-square](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/white-round-square/32/10385_2.png) [@white-round-square](https://forum.clockworkpi.com/u/white-round-square)\ **Post date:** [March 19, 2025, 9:03pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/233 "2025-03-19T21:03:06Z")
> [@alpixdotro](#): > > I recently installed PowerShell Iā€™m sorry for asking, but I need to know ā€“ why? ---
**Author:** ![alpixdotro](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/alpixdotro/32/11107_2.png) [@alpixdotro](https://forum.clockworkpi.com/u/alpixdotro)\ **Post date:** [March 19, 2025, 9:16pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/234 "2025-03-19T21:16:12Z")
haha, no worries, no harm done. iā€™m a Microsoft 365 admin, sometimes I need to run scripts on the go to export / fix stuff using the Microsoft administrative modules like ( MS Graph, Exchange Online, Microsoft Teams ) ā€¦ itā€™s much handier to just run them on the uConsole, than carrying my laptop with me. Microsoft kind of sticks to their modules, they canā€™t even keep the PowerShell ones up-to-date and working flawlessly, let alone bringing out new ones for Linux for example. or atleast thatā€™s the plan, Iā€™ll see if I stick to doing so šŸ˜ ---
**Author:** ![white-round-square](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/white-round-square/32/10385_2.png) [@white-round-square](https://forum.clockworkpi.com/u/white-round-square)\ **Post date:** [March 19, 2025, 9:26pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/235 "2025-03-19T21:26:56Z")
> [@alpixdotro](#): > > let alone bringing out new ones for Linux for example. just in case: [Running a hypervisor?](https://forum.clockworkpi.com/t/running-a-hypervisor/15859/) ---
**Author:** ![alpixdotro](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/alpixdotro/32/11107_2.png) [@alpixdotro](https://forum.clockworkpi.com/u/alpixdotro)\ **Post date:** [March 19, 2025, 9:35pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/236 "2025-03-19T21:35:01Z")
Yeah, not really the case, but thanks ! Would ditch Windows if I could, but kind of the purpose of my job. Found this guide a while back to install PowerShell on RPI and then just use it seamlessly, without depending on Windows. > **[Installing PowerShell to the Raspberry Pi](https://pimylifeup.com/raspberry-pi-powershell/)** > > A powerful shell for automation But, as alternative I found some guides a while back, to run Windows 11/10 on containerized in Docker on Raspberry Pi 5, that was pretty neat. ---
**Author:** ![Greg\_E](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@Greg\_E](https://forum.clockworkpi.com/u/Greg_E)\ **Post date:** [March 19, 2025, 10:11pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/237 "2025-03-19T22:11:36Z")
Since i cant see the OS running, im not sure i can put the new kernel in. If its as simple as copy file to the card, then yes I can do that. If it matters, ive been using the uconsole and raspi imager to get the images to the card. ---
**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\ **Post date:** [March 19, 2025, 10:17pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/238 "2025-03-19T22:17:14Z")
OK, Iā€™ll just make a new lite image for you to just test with. You didnā€™t apply any custom settings when flashing the image right? Of course the old devterm cm3 driver wonā€™t compile with 6.12 had to make a few changes to bring it up to date. I was hopping since the panel driver worked with the CM4&5 the CM3 would work to but no. Iā€™ll shoot you a DM when I have a link with the image. ---
**Author:** ![Greg\_E](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@Greg\_E](https://forum.clockworkpi.com/u/Greg_E)\ **Post date:** [March 19, 2025, 11:11pm UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/239 "2025-03-19T23:11:14Z")
You can just drop it on your google drive. ---
**Author:** ![neuvoz](https://avatars.discourse-cdn.com/v4/letter/n/ed8c4c/32.png) [@neuvoz](https://forum.clockworkpi.com/u/neuvoz)\ **Post date:** [March 20, 2025, 4:14am UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/240 "2025-03-20T04:14:31Z")
it cannot input ā€œ|ā€ please check it thanks. ---
**Author:** ![white-round-square](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/white-round-square/32/10385_2.png) [@white-round-square](https://forum.clockworkpi.com/u/white-round-square)\ **Post date:** [March 20, 2025, 9:38am UTC](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847/241 "2025-03-20T09:38:05Z")
> [@neuvoz](#): > > it cannot input ā€œ|ā€ try to `sudo raspi-config` and set keyboard to US again [Previous page](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847.md?page=11) [Next page](https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847.md?page=13)