# Can I use raspberry pi CM4 8GB model on uConsole?

**URL:** <https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265>\
**Category:** uConsole\
**Tags:** help, hardware\
**Created:** [December 1, 2022, 8:52am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265 "2022-12-01T08:52:56Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![asdf1234](https://avatars.discourse-cdn.com/v4/letter/a/e495f1/32.png) [@asdf1234](https://forum.clockworkpi.com/u/asdf1234)\
**Post date:** [December 1, 2022, 8:52am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/1 "2022-12-01T08:52:56Z")

</div>

Hello

Can I plug in compute model 4 with 8GB of ram to uConsole?

---

<div class="post-metadata">

**Author:** ![hctr](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/hctr/32/6681_2.png) [@hctr](https://forum.clockworkpi.com/u/hctr)\
**Post date:** [December 1, 2022, 4:11pm UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/2 "2022-12-01T16:11:44Z")

</div>

I would assume you could swap out the cores at your discretion, but idk. Maybe when/if the Raspberry Pi CM5 drops, you could swap that in too. An upgrade path like that would make it that much better… now if only the uConsule I/O reflected the power of the CM4. An upgrade path too the carrier board and more expansion module options would be really cool.  
🤔

---

<div class="post-metadata">

**Author:** ![spv](https://avatars.discourse-cdn.com/v4/letter/s/a88e57/32.png) [@spv](https://forum.clockworkpi.com/u/spv)\
**Post date:** [December 1, 2022, 4:49pm UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/3 "2022-12-01T16:49:52Z")

</div>

that’s one nice thing about FOSS hardware, even when clockworkpi stops supporting the uConsole and/or DevTerm, third parties could develop new core modules, cell upgrades, or even a new compatible screen, for, say, 1080p or even 4k

---

<div class="post-metadata">

**Author:** ![Jase](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/jase/32/4604_2.png) [@Jase](https://forum.clockworkpi.com/u/Jase)\
**Post date:** [December 2, 2022, 6:28am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/4 "2022-12-02T06:28:36Z")

</div>

This is what I’m planning on doing. But you need the CM I/O board to be able to flash the eMMC if you don’t get a Lite.

Nothing official from Clockwork so I could be wrong…

---

<div class="post-metadata">

**Author:** ![Niclio](https://avatars.discourse-cdn.com/v4/letter/n/9de053/32.png) [@Niclio](https://forum.clockworkpi.com/u/Niclio)\
**Post date:** [November 14, 2023, 3:24pm UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/5 "2023-11-14T15:24:58Z")

</div>

Alex told me I can use the 8Gb, no emmc. I ordered the R01 and adapter and separatly the CM4 8G. the uconsole should arrive today, so i will confirm the 8Gb soon!

---

<div class="post-metadata">

**Author:** ![hans](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/hans/32/6729_2.png) [@hans](https://forum.clockworkpi.com/u/hans)\
**Post date:** [November 16, 2023, 8:49pm UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/6 "2023-11-16T20:49:39Z")

</div>

I used to understand that I could use one with emmc but pre-install the OS with extra hardware.

---

<div class="post-metadata">

**Author:** ![markatlnk](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@markatlnk](https://forum.clockworkpi.com/u/markatlnk)\
**Post date:** [November 17, 2023, 1:50am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/7 "2023-11-17T01:50:44Z")

</div>

To use the eMMC you need a developer board for the CM4 unit. That is a bit of a pain, but the disk speed access will be way faster than the SD card.

---

<div class="post-metadata">

**Author:** ![DeRock25](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/derock25/32/7976_2.png) [@DeRock25](https://forum.clockworkpi.com/u/DeRock25)\
**Post date:** [November 17, 2023, 3:23am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/8 "2023-11-17T03:23:55Z")

</div>

> [@uConsole: USB booting for re-flashing eMMC possible?](https://forum.clockworkpi.com/t/uconsole-usb-booting-for-re-flashing-emmc-possible/11287/2):
>
> [image] this is on the schematic for the cm4 adapter board… nRPIBOOT i believe is the jumper for booting from usb… EEPROM\_nWP is to write protect it… like for imbedded applications… so… no idea where it is… but it doesn’t go to the sodimm connector… sorry that i don’t know… but if there IS a way… it is located on the adapter board. If this can’t be found… you will have to pull it… top right corner of the adapter board has a SW1 [image]

It’s there… But a pain I’m sure… that is the jumper for flashing…

---

<div class="post-metadata">

**Author:** ![Lotech](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/lotech/32/10323_2.png) [@Lotech](https://forum.clockworkpi.com/u/Lotech)\
**Post date:** [March 6, 2024, 4:29pm UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/9 "2024-03-06T16:29:25Z")

</div>

Yeah, I wised it can USB boot like the Pi but need to flash the ROM to enable that, and I believe the uConsole has no ROM no BIOS so can’t do that.

---

<div class="post-metadata">

**Author:** ![xerxes42](https://avatars.discourse-cdn.com/v4/letter/x/d26b3c/32.png) [@xerxes42](https://forum.clockworkpi.com/u/xerxes42)\
**Post date:** [March 13, 2024, 4:29pm UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/10 "2024-03-13T16:29:51Z")

</div>

YES!  
If you get a model with eMMC, you cannot use the SD card slot, though.  
It doesn’t even show up on the system at all.

CM4+8GB RAM: Yes, no issues  
CM4+eMMC: Yes, it works, but you have to flash the eMMC boot drive with another system (dev/breakout board)

I’m using a CM4+32GB+8GBRAM with 0 issues.

---

<div class="post-metadata">

**Author:** ![markatlnk](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@markatlnk](https://forum.clockworkpi.com/u/markatlnk)\
**Post date:** [March 14, 2024, 12:08am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/11 "2024-03-14T00:08:42Z")

</div>

I am also using the same CM4 with eMMC, it does work well.

---

<div class="post-metadata">

**Author:** ![Buddy](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@Buddy](https://forum.clockworkpi.com/u/Buddy)\
**Post date:** [September 18, 2024, 4:15am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/12 "2024-09-18T04:15:41Z")

</div>

I just bought a new CM4 I  
8gb Lite, does anyone know if I have to reflash or anything once I install the new core?

---

<div class="post-metadata">

**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\
**Post date:** [September 18, 2024, 10:34am UTC](https://forum.clockworkpi.com/t/can-i-use-raspberry-pi-cm4-8gb-model-on-uconsole/9265/13 "2024-09-18T10:34:00Z")

</div>

Nope just fire it up.
