# Display not working after RTL/SDR Install

**URL:** <https://forum.clockworkpi.com/t/display-not-working-after-rtl-sdr-install/18960>\
**Category:** uConsole\
**Created:** [August 3, 2025, 2:31pm UTC](https://forum.clockworkpi.com/t/display-not-working-after-rtl-sdr-install/18960 "2025-08-03T14:31:58Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\
**Post date:** [August 3, 2025, 3:59pm UTC](https://forum.clockworkpi.com/t/display-not-working-after-rtl-sdr-install/18960/2 "2025-08-03T15:59:09Z")

</div>

There are some little problems with the CM5. I have made a package to set everything up on the CM4 and 5 here.

> [@HackerGadgets AIO Board Package](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875):
>
> I have been working on a package that sets up the HackerGadgets AIO Board. This package supports the RPi CM4/5. This package is designed for Debian if used on another distro YMMV. I wanted to make this package to take some of the headache of configuring everything if you so choose. To install the package in Debian sudo apt update && sudo apt --install-recommends install hackergadgets-uconsole-aio-board -y && sudo apt install meshtastic-mui -y to install everything If you would like to just ins…

The problem you have is with the CM5 and meshtasticand the spi. The easiest route if you don’t want to install that package would be to `sudo apt install clockworkpi-blacklight`

---

_[View the full topic](https://forum.clockworkpi.com/t/display-not-working-after-rtl-sdr-install/18960)._