# GameShell OS Image v0.6 gamma

**URL:** <https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419>\
**Category:** Firmware and Apps\
**Created:** [January 10, 2023, 11:07am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419 "2023-01-10T11:07:35Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [January 10, 2023, 11:07am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/1 "2023-01-10T11:07:36Z")

</div>

New GameShell OS Image  
v0.6 gamma

Armbian jammy (ubuntu jammy) based 2210 LTS support comes with an almost perfect open source GPU **Lima** driver.  
Completely replaces the original launcher with LauncherGo to improve performance and reduce power usage.  
Updated RetroArch to v1.14.0  
Updated Love2D v11.0 Mysterious Mysteries  
Integrated ClockworkPi APT repo

> **[1.58 GB file on MEGA](https://mega.nz/file/4dUzVQRS#On3Jp06NfzErmFdQ56H--OYRptq60PHxiVy2Zap-6_Q)**

---

<div class="post-metadata">

**Author:** ![elagost](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/elagost/32/4452_2.png) [@elagost](https://forum.clockworkpi.com/u/elagost)\
**Post date:** [January 11, 2023, 4:11pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/2 "2023-01-11T16:11:40Z")

</div>

It’s been a while since a gameshell OS image. Nice to see an armbian rebase, kernel update, and launchergo finally in place. I will try it out!

---

<div class="post-metadata">

**Author:** ![ssalanc](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/ssalanc/32/4385_2.png) [@ssalanc](https://forum.clockworkpi.com/u/ssalanc)\
**Post date:** [January 11, 2023, 8:58pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/3 "2023-01-11T20:58:51Z")

</div>

Thank you for the new image, installed it and tried a few emulators without a problem. But I can’t get pico8 working.

---

<div class="post-metadata">

**Author:** ![elagost](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/elagost/32/4452_2.png) [@elagost](https://forum.clockworkpi.com/u/elagost)\
**Post date:** [January 12, 2023, 12:48am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/4 "2023-01-12T00:48:53Z")

</div>

It appears there’s a lot missing in launchergo, and the old launcher relies on python2 and wicd, neither of which are fully supported in the current software. PICO-8 isn’t present, GPSP doesn’t appear to work, and MGBA is very slow. Overall though it’s neat to be on armbian and really modern software.

---

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [January 12, 2023, 10:25am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/5 "2023-01-12T10:25:49Z")

</div>

Thanks for the feedback, will update those missing in next release

---

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [January 12, 2023, 10:31am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/6 "2023-01-12T10:31:45Z")

</div>

what rom ? I’ve tested the MGBA on my side, it looks normal , I ran the super mario game

---

<div class="post-metadata">

**Author:** ![elagost](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/elagost/32/4452_2.png) [@elagost](https://forum.clockworkpi.com/u/elagost)\
**Post date:** [January 12, 2023, 1:31pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/7 "2023-01-12T13:31:15Z")

</div>

I am happy to test. I tried 2 GBA games, Fire Emblem and Kirby & The Amazing Mirror. Both have choppy audio and are in slow-motion. My previous OS image is the community image from here: [Custom D.E.O.T. V2.0+/Clockwork OS v0.5 image - With customised DEOT interface, Kernel 5.7, Optional 1400MHz OC, Debian 10 Buster, Retroarch 1.9.0, Mupen64+ plus more! (Current build: 200903)](https://forum.clockworkpi.com/t/custom-d-e-o-t-v2-0-clockwork-os-v0-5-image-with-customised-deot-interface-kernel-5-7-optional-1400mhz-oc-debian-10-buster-retroarch-1-9-0-mupen64-plus-more-current-build-200903/5088)

The configuration from that image seems to work a lot better. I have the beta image on a spare SD card so I can try anything you want.

---

<div class="post-metadata">

**Author:** ![edward](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/edward/32/6761_2.png) [@edward](https://forum.clockworkpi.com/u/edward)\
**Post date:** [January 25, 2023, 12:11pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/8 "2023-01-25T12:11:23Z")

</div>

I wanted to try it out, but I get this horrible stuttering and tearing of the screen. Any idea what causes it?  
Also using B to confirm and A to go back is weird, and switching layout in settings doesn’t change it (I guess it’s launcher go thing)

 ![Screenshot 2023-01-25 at 14.01.23](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/3/327530b861345ad800deeb61c4a2eb75603f60b8.jpeg)

---

<div class="post-metadata">

**Author:** ![edward](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/edward/32/6761_2.png) [@edward](https://forum.clockworkpi.com/u/edward)\
**Post date:** [January 25, 2023, 12:15pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/9 "2023-01-25T12:15:06Z")

</div>

btw, if this helps, I think I had the same problem when I was trying DEOT build, but I didn’t bother then, and just switched back to regular os

---

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [January 26, 2023, 1:20am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/10 "2023-01-26T01:20:30Z")

</div>

Is it just the launcher interface tearing or everything tearing?

I mean , if you ran some program, like retroarch

---

<div class="post-metadata">

**Author:** ![edward](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/edward/32/6761_2.png) [@edward](https://forum.clockworkpi.com/u/edward)\
**Post date:** [January 26, 2023, 10:29am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/11 "2023-01-26T10:29:16Z")

</div>

I didn’t check retroarch, I can check it a little later. But it was starting tearing right from the beginning of the boot, so even command line “happy hacking” part was affected, so I guess it’s not just launcher

---

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [January 27, 2023, 12:59am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/12 "2023-01-27T00:59:53Z")

</div>

OK, got you

I will fix this issue in the next 0.6 os Image

thanks for your important feedback

---

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [January 27, 2023, 7:15am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/13 "2023-01-27T07:15:08Z")

</div>

os image updated

kernel restored to avoid tearing problem

and added Music Player , Pico8 in launchergo

---

<div class="post-metadata">

**Author:** ![edward](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/edward/32/6761_2.png) [@edward](https://forum.clockworkpi.com/u/edward)\
**Post date:** [January 27, 2023, 2:03pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/14 "2023-01-27T14:03:58Z")

</div>

just checked. now it works great, thanks. gonna try some games during the weekend

---

<div class="post-metadata">

**Author:** ![jelly](https://avatars.discourse-cdn.com/v4/letter/j/a87d85/32.png) [@jelly](https://forum.clockworkpi.com/u/jelly)\
**Post date:** [February 2, 2023, 10:49pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/15 "2023-02-02T22:49:07Z")

</div>

New user GS user here. Thank you some much for the updated image, that’s really appreciated !

Is the lima driver disabled by default ? If so, how can I switch it on ? My GLES application reports  
`Renderer: llvmpipe (LLVM 15.0.6, 128 bits), Shading language: GLSL ES 3.20`  
which looks like a software driver.

---

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [February 3, 2023, 4:01am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/16 "2023-02-03T04:01:35Z")

</div>

Sorry for the mistake

Lima is enabled by default, and dont need to switch back to fbdev, lima is stable enough now

But I forgot to add **cpi** user to **render** group in image,

that is why X can not use lima driver

## Solution

ssh into GS

run

```auto
sudo usermod -a -G render cpi
sudo reboot

```

then you will have lima

OR

just re-download the image, **clockworkos\_v0.6\_gamma\_2.img.7z**

> **[1.42 GB file on MEGA](https://mega.nz/file/MAVUiKBC#GSaPRF7Ki80GpkELIuujGs2tBWCfuoO4mIkL_uu-vkg)**

---

<div class="post-metadata">

**Author:** ![jelly](https://avatars.discourse-cdn.com/v4/letter/j/a87d85/32.png) [@jelly](https://forum.clockworkpi.com/u/jelly)\
**Post date:** [February 3, 2023, 5:46pm UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/17 "2023-02-03T17:46:28Z")

</div>

Yes I ran the two commands and the gfx driver switched automatically to lima, thank you! 😄

Now I face the issue that initializing the driver (or creating a rendering context ?) takes **a lot** of time: if I run  
`time DISPLAY=:0 glxinfo`,  
I get the relevant lines:

```auto
Vendor: lima (0x13b5)
    Device: Mali400 (0xffffffff)
    Version: 22.0.5
    Accelerated: yes
    Video memory: 0MB
    Unified memory: yes
    Preferred profile: compat (0x2)
    Max core profile version: 0.0
    Max compat profile version: 2.1
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 2.0

OpenGL ES profile version string: OpenGL ES 2.0 Mesa 22.0.5
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16

```

so yay!  
but the command itself took

```auto
real 0m30.443s
user 0m0.315s
sys 0m0.150s

```

---

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [February 4, 2023, 3:24am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/18 "2023-02-04T03:24:36Z")

</div>

Glad to know

You pointed out a problem encountered in reality, that kernel 5.3.6 is relatively slow when starting binary programs, running is ok,but if a newer kernel is used, there is a chance of causing screen flicker, and crashes, so until this problem is solved, I can only use kernel 5.3.6 for os image  
The known shortcoming currently encountered is that glmark2 cannot run normally and will crash, but everything else is still okay for now

---

<div class="post-metadata">

**Author:** ![i4s33u](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/i4s33u/32/4004_2.png) [@i4s33u](https://forum.clockworkpi.com/u/i4s33u)\
**Post date:** [February 8, 2023, 9:56am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/19 "2023-02-08T09:56:31Z")

</div>

All of my RetroArch cores was running without savestates. It looks like core info files was not downloaded successfully, and also the cores did not show in the list. Does anyone had the same issue?

---

<div class="post-metadata">

**Author:** ![i4s33u](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/i4s33u/32/4004_2.png) [@i4s33u](https://forum.clockworkpi.com/u/i4s33u)\
**Post date:** [February 8, 2023, 10:08am UTC](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419/20 "2023-02-08T10:08:19Z")

</div>

I think issue was with action.config files. They are pointing to /home/cpi/apps/emulators/ folder. There was no core info files in that folder.  
I think it can be fixed by go to RetroArch and change core info download folder to /home/cpi/apps/emulators, then download them again

[Next page](https://forum.clockworkpi.com/t/gameshell-os-image-v0-6-gamma/9419.md?page=2)
