# HackerGadgets AIO Board Package **URL:** \ **Category:** uConsole\ **Tags:** hardware, hackergadgets-aio\ **Created:** [June 8, 2025, 12:41am UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875 "2025-06-08T00:41:09Z")\ **Posts on this page:** 20\ **Page:** 40
**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\ **Post date:** [April 21, 2026, 9:21pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/799 "2026-04-21T21:21:07Z")
That’s kind of just a limitation of the software and small screen. ---
**Author:** ![Roro](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/roro/32/14068_2.png) [@Roro](https://forum.clockworkpi.com/u/Roro)\ **Post date:** [April 22, 2026, 11:23am UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/800 "2026-04-22T11:23:14Z")
![YZvSM8N](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/f/f9d6897f55f9755aaec1ff6774f7c4296a717ad3.png) ?? Must be a way to change the size ---
**Author:** ![Rex](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rex/32/16852_2.png) [@Rex](https://forum.clockworkpi.com/u/Rex)\ **Post date:** [April 22, 2026, 4:20pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/801 "2026-04-22T16:20:39Z")
You can change the font size of the text within the de, but the graphics not so much unless you actually go in and change it in the program and recompile. ---
**Author:** ![Roro](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/roro/32/14068_2.png) [@Roro](https://forum.clockworkpi.com/u/Roro)\ **Post date:** [April 22, 2026, 6:41pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/802 "2026-04-22T18:41:15Z")
Thank you very much I will keep you updated ---
**Author:** ![mkopack](https://avatars.discourse-cdn.com/v4/letter/m/41988e/32.png) [@mkopack](https://forum.clockworkpi.com/u/mkopack)\ **Post date:** [April 24, 2026, 6:41pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/803 "2026-04-24T18:41:38Z")
I’m having the same problem. Every time I try to run I get the error message that it’s not installed, and when I try to install it I get the message that it’s already installed. I’m kind of stumped. ---
**Author:** ![DigitalDreams](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/digitaldreams/32/16007_2.png) [@DigitalDreams](https://forum.clockworkpi.com/u/DigitalDreams)\ **Post date:** [April 24, 2026, 6:59pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/804 "2026-04-24T18:59:28Z")
Think there’s a library missing or it needs installing by a different method. When I get round to trying again I’ll manually enter lat/long min and max without messing up the scaling of a cropped map 🙄. First attempt put me a mile or so away from reality, so almost got it right. Once you have a working map I ‘think’ you have to save preferences or it’s lost on next boot… ---
**Author:** ![Cha0](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/cha0/32/4332_2.png) [@Cha0](https://forum.clockworkpi.com/u/Cha0)\ **Post date:** [April 28, 2026, 4:00pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/805 "2026-04-28T16:00:30Z")
Complete noob to SDR question. I have the package installed and fired up SDR Brown. Changed the first drop down to RTL-SDR but when i open the next drop down where its supposed to say generic… the drop down is empty ---
**Author:** ![arkekklesia](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/arkekklesia/32/12204_2.png) [@arkekklesia](https://forum.clockworkpi.com/u/arkekklesia)\ **Post date:** [April 28, 2026, 8:32pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/806 "2026-04-28T20:32:50Z")
are you using the AIOv2? if so the modules are turned off by default. go here to use the script > **[GitHub - hackergadgets/aiov2\_ctl: Control and telemetry client for the uConsole AIO...](https://github.com/hackergadgets/aiov2_ctl/)** > > Control and telemetry client for the uConsole AIO v2 board, offering both CLI and GUI interfaces for power management, peripheral control, and hardware monitoring. ---
**Author:** ![Cha0](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/cha0/32/4332_2.png) [@Cha0](https://forum.clockworkpi.com/u/Cha0)\ **Post date:** [April 29, 2026, 1:43am UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/807 "2026-04-29T01:43:43Z")
That was it. I could have swore that I read if you install Rex aio package, that it will enable everything by default. Guess that wasn’t the case. Thanks for the info. ---
**Author:** ![karcio](https://avatars.discourse-cdn.com/v4/letter/k/57b2e6/32.png) [@karcio](https://forum.clockworkpi.com/u/karcio)\ **Post date:** [May 2, 2026, 6:13am UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/808 "2026-05-02T06:13:50Z")
It is not safe to have turn on all. As I said before somewhere. If you have Lora enabled and no antenna attached- you can burn 🔥 it. So I think for security reason all of disable by default ---
**Author:** ![snipeytje](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@snipeytje](https://forum.clockworkpi.com/u/snipeytje)\ **Post date:** [May 2, 2026, 7:37am UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/809 "2026-05-02T07:37:48Z")
The aio package was made for the V1, where everything is on all the time ---
**Author:** ![oscarkcau](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/oscarkcau/32/16535_2.png) [@oscarkcau](https://forum.clockworkpi.com/u/oscarkcau)\ **Post date:** [May 4, 2026, 2:49am UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/810 "2026-05-04T02:49:21Z")
Hi all, i just got the AIO board a week ago and have questions about GPS module i cannot figure out after researching online. The first one is even I turn off GPS via GPIO pin 27 the gps positioning is keep working and sending NMEA strings to ttyAMA0, does this abnormal or i was using a wrong control pin? The second issue is from GPS module I keep receiving this NMEA string: $GPTXT,01,01,01,ANTENNA OPEN\*25 It seems the antenna is not powered or not connected, but i am using the stock antenna came with the AIO kit and it seems an active antenna … also the GPS positioning works correctly with this message so I do not know this is error message or just normal ---
**Author:** ![BDK1786](https://avatars.discourse-cdn.com/v4/letter/b/e36b37/32.png) [@BDK1786](https://forum.clockworkpi.com/u/BDK1786)\ **Post date:** [May 17, 2026, 8:36pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/811 "2026-05-17T20:36:52Z")
I am struggling to get the maps to show up in the Meshtastic MUI. I have the files extracted here: /home/dragon/.portduino/default/maps In the maps folder i extracted the .zips here so i have the following folders in maps: atlas dark-matter-brown openstreet-map positron ![20260517_143512](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/3X/3/1/316abdd23c706732ba2d51e7e4ba5812e9a1b79b.jpeg) Any help is greatly appreciated. I am horribly new to all things Pi and Linux/Ubuntu. Thank you! ---
**Author:** ![Michal\_Wojcik](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/michal_wojcik/32/16587_2.png) [@Michal\_Wojcik](https://forum.clockworkpi.com/u/Michal_Wojcik)\ **Post date:** [May 17, 2026, 9:06pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/812 "2026-05-17T21:06:17Z")
Hey! I’ve missed that conversation, but I have solution for you. I faced same issue, you must desolder one thing from board to get it working There’s diode I think that it’s back feeding power to it and overloading GPS (it got 4.7V!) Remove this, it’s a leftover from tests by HG team. You’ll get antenna ok and will be able to disable gps. ![Screenshot 2026-05-14 082934](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/3X/6/b/6b1a13bae595b623abf83ab15c74bbe3afd64778.jpeg) ---
**Author:** ![mabrown](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/mabrown/32/15744_2.png) [@mabrown](https://forum.clockworkpi.com/u/mabrown)\ **Post date:** [May 17, 2026, 11:21pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/813 "2026-05-17T23:21:23Z")
You can see the names of the maps in the list? Try zooming out. i looked for an openstreetmap bundle that is zoomed farther in and found one.Can’t remember where off the top of my head and i’m on my uConsole rather than my MacBook, so I can’t look for it. the one I found still doesnt have maps close enough, but theyre better what you listed ---
**Author:** ![Mauser792](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/mauser792/32/16682_2.png) [@Mauser792](https://forum.clockworkpi.com/u/Mauser792)\ **Post date:** [May 20, 2026, 3:11pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/814 "2026-05-20T15:11:55Z")
Hi all, sorry if this question has been asked before, but I couldn’t find any topic on it. I’m running Trixie with the AIO V2 software package and running into an issue with tar1090 and SDR++ Brown. Once tar1090 has been started, it prevents SDR++ from receiving any data, even when the browser page for tar1090 has been closed. I’ve been looking into it and it seems that the ADS-B decoder ‘readsb’ is using the USB and stopping data to SDR++. I googled a workaround by manually stopping/starting readsb with “sudo systemctl stop readsb”. When readsb is stopped SDR++ gets data again. Is there a way to fix/automate this, or am I doing something wrong? ---
**Author:** ![snipeytje](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@snipeytje](https://forum.clockworkpi.com/u/snipeytje)\ **Post date:** [May 20, 2026, 4:26pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/815 "2026-05-20T16:26:56Z")
you need to close the full browser for the readadsb service to shut down again I think ---
**Author:** ![Mauser792](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/mauser792/32/16682_2.png) [@Mauser792](https://forum.clockworkpi.com/u/Mauser792)\ **Post date:** [May 20, 2026, 6:34pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/816 "2026-05-20T18:34:15Z")
That’s what I thought but that doesn’t work. The only way I have managed to swap between tar1090 and SDR++ is by manually turning readsd on and off. On my previous installation of bookworm 12 I didn’t have the problem, only since the new install of Trixie. ---
**Author:** ![snipeytje](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@snipeytje](https://forum.clockworkpi.com/u/snipeytje)\ **Post date:** [May 20, 2026, 6:39pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/817 "2026-05-20T18:39:00Z")
the tar1090 shortcut launches a script, if you run that script in a terminal you’ll likely get more output to figure out what’s going on ---
**Author:** ![Mauser792](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/mauser792/32/16682_2.png) [@Mauser792](https://forum.clockworkpi.com/u/Mauser792)\ **Post date:** [May 20, 2026, 7:11pm UTC](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875/818 "2026-05-20T19:11:12Z")
thanks, I’ll give that a try. 👍 [Previous page](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875.md?page=39) [Next page](https://forum.clockworkpi.com/t/hackergadgets-aio-board-package/17875.md?page=41)