# Help connecting an e-ink display

**URL:** <https://forum.clockworkpi.com/t/help-connecting-an-e-ink-display/9716>\
**Category:** DevTerm\
**Tags:** tinkering, hardware\
**Created:** [March 8, 2023, 1:38am UTC](https://forum.clockworkpi.com/t/help-connecting-an-e-ink-display/9716 "2023-03-08T01:38:44Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![adcockm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/adcockm/32/1664_2.png) [@adcockm](https://forum.clockworkpi.com/u/adcockm)\
**Post date:** [March 8, 2023, 4:27am UTC](https://forum.clockworkpi.com/t/help-connecting-an-e-ink-display/9716/4 "2023-03-08T04:27:53Z")

</div>

Easiest way to find info is to search the forum for “devterm gpio”.

I hope it’s possible to connect your eink display, but it won’t be trivial. From what I’ve read there aren’t many available GPIO pins on any of the Devterm models, as they are already used internally for other stuff. If you got really lucky and the default display and eink display required the same pins (though almost certainly in a different order) you may be able to build some sort of adaptor.

Here’s a potentially relevant thread:

> [@The booby-trapped DevTerm GPIO](https://forum.clockworkpi.com/t/the-booby-trapped-devterm-gpio/9410):
>
> NOTE: my experience is with the R-01 module, but since the mainboard remains the same regardless, this will apply to all available brains. I wanted to add an RTC to my DevTerm. This is something that has been quite simple on my other SBC based devices. I knew it would be a challenge with this one because of the unconventional connector employed. I went to Adafruti looking for a suitable break out kit but didn’t find what I wanted. So I went over to new egg and found the parts: break out PCBs, t…

---

_[View the full topic](https://forum.clockworkpi.com/t/help-connecting-an-e-ink-display/9716)._
