# Is anyone selling a pre-configured 128gb SD card **URL:** \ **Category:** GameShell\ **Created:** [August 13, 2019, 8:28pm UTC](https://forum.clockworkpi.com/t/is-anyone-selling-a-pre-configured-128gb-sd-card/4294 "2019-08-13T20:28:43Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![javelinface](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/javelinface/32/3079_2.png) [@javelinface](https://forum.clockworkpi.com/u/javelinface)\ **Post date:** [August 18, 2019, 3:58pm UTC](https://forum.clockworkpi.com/t/is-anyone-selling-a-pre-configured-128gb-sd-card/4294/3 "2019-08-18T15:58:35Z")
Hey, welcome to the forums. 🙂 A great start would be to try using @guu’s fantastic auto expanding image based on the latest version of the OS. (0.4) (Some people prefer using older versions for compatibility/performance reasons) > [@Just got a new 64 gb as card for the 0.4 os, but when I flash it, only 43 mb show](https://forum.clockworkpi.com/t/just-got-a-new-64-gb-as-card-for-the-0-4-os-but-when-i-flash-it-only-43-mb-show/4110/5): > > just made a auto expand root fs os v0.4 img, it will expand the partition to be full size of sdcard I hope it will help a little. [https://mega.nz/#F!IUkxQSjB!d\_H9leVSSl6tDP4X0oWnag](https://mega.nz/#F!IUkxQSjB!d_H9leVSSl6tDP4X0oWnag) this image will reboot twice while the first boot,then everything will be all right. tested on 16GB TF card If you haven’t already got one, find a program that you can use on your computer to “SSH” into your device. Lots of people use FileZilla here it seems. I personally use Cyberduck. It’s all just personal preference. Alternatively, you can use a command line interface, like Terminal, or Putty. If you’re learning, seeing things graphically is much more familiar. Just be careful not to drag files or folders into the wrong place, as this can mess things up! @Rebusmind made a post listing some alternative standalone emulators if you’re not satisfied with the speed of the included ones. Each of them should be a link to their respective github pages, that should contain installation instructions. > [@All emulators run awfully, are there any better gba and snes emulators?](https://forum.clockworkpi.com/t/all-emulators-run-awfully-are-there-any-better-gba-and-snes-emulators/4191/2): > > I assume you are using RetroArch. The solution for me was to switch to the various standalone emulators that were posted on this forum (like [PCSX-R](https://github.com/gpnux/PCSXR), [PocketSNES](https://github.com/zfteam/PocketSNES-gameshell), [Picodrive](https://github.com/zfteam/picodrive-gameshell), [gPSP](https://github.com/zfteam/gpsp) and [OhBoy](https://github.com/zfteam/ohboy-gameshell)). With them I had zero issues (apart from tearing, but that seems to be a problem with the GS itself). It’s a bit tricky at first if you are not used to the way the GS is set up, but there are a number of explanations on this forum that get you started. If you have more questions, let me know. The only other thing you will then need to do is source some BIOS files for some emulators, and put them in the correct location. If an emulator doesn’t work, it is most likely needing a BIOS. Try using the search to find the emulator name + BIOS to find the solution to your problems. This OS version actually comes with a lot of emulators. As for ROMS, that’s something that you’ll need to work out yourself. Selling a pre made 128GB card for money, filled with ROMS is an extremely Grey area, and is … let’s just say, frowned upon. There would be a lot of expectations when it comes to having a pre made card, and would no doubt result in a lot of back and forth communication to get things working. Doing it yourself, you really understand how it works, and can troubleshoot it much better. Plus you have a great community to help you, right here. Why not ask around here for help setting up emulators? 🙂 There are a few other troubleshooting issues that some people need to deal with. I’ve tried to answer as many of them as I can when I see them. Click on my profile, and go through my activity to see what I’ve answered if you want. Or if you see another user who mainly answers questions, chances are you can see them answering another question you may have, or pointing out a feature that you didn’t know of. --- _[View the full topic](https://forum.clockworkpi.com/t/is-anyone-selling-a-pre-configured-128gb-sd-card/4294)._