# Issues starting **URL:** \ **Category:** uConsole\ **Tags:** hardware\ **Created:** [December 4, 2025, 2:40pm UTC](https://forum.clockworkpi.com/t/issues-starting/20660 "2025-12-04T14:40:54Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![white-round-square](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/white-round-square/32/10385_2.png) [@white-round-square](https://forum.clockworkpi.com/u/white-round-square)\ **Post date:** [December 4, 2025, 3:53pm UTC](https://forum.clockworkpi.com/t/issues-starting/20660/4 "2025-12-04T15:53:25Z")
> [@sbsshadow](#): > > I have to boot and shutdown a couple of times for it to startup , is this normal? yes, you need to upgrade an eeprom, they released CM5 a bit buggy > [@EEPROM config and the CM5 lite](https://forum.clockworkpi.com/t/eeprom-config-and-the-cm5-lite/19649): > > With the upcoming release of NVME capable adapter boards from @vileer & @lululvlv I have changed up the EEPROM config to be able to use them. If you have a CM5 lite and are having problems with the sd card booting or have already updated the config but plan on getting a NVMe board. You need to edit your EEPROM and your CM5 lite has to have updated firmware that was released after 2025-01-06. Check using vcgencmd version to update sudo rpi-eeprom-update sudo rpi-eeprom-config -e To edit the eep… --- _[View the full topic](https://forum.clockworkpi.com/t/issues-starting/20660)._