# LTE modem on Devterm?

**URL:** <https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587>\
**Category:** DevTerm\
**Tags:** hardware\
**Created:** [July 27, 2023, 3:00pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587 "2023-07-27T15:00:18Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![alcane](https://avatars.discourse-cdn.com/v4/letter/a/ed655f/32.png) [@alcane](https://forum.clockworkpi.com/u/alcane)\
**Post date:** [July 27, 2023, 3:00pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/1 "2023-07-27T15:00:18Z")

</div>

hi,

Somebody found the way to install a lte modem to the devterm ?

Thank you for your help  
Alcane

---

<div class="post-metadata">

**Author:** ![Petrakis](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/petrakis/32/256_2.png) [@Petrakis](https://forum.clockworkpi.com/u/Petrakis)\
**Post date:** [July 27, 2023, 3:53pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/2 "2023-07-27T15:53:49Z")

</div>

I was using a USB modem I got, other than that one could get the same modem chip that comes to the uconsole and design a PCB for it replacing the expansion PCB of the devterm

---

<div class="post-metadata">

**Author:** ![alcane](https://avatars.discourse-cdn.com/v4/letter/a/ed655f/32.png) [@alcane](https://forum.clockworkpi.com/u/alcane)\
**Post date:** [July 27, 2023, 4:10pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/3 "2023-07-27T16:10:48Z")

</div>

hi Petrakis,

Thank you. Idea here is to embeded all and not have external modem on usb. How did you do ?  
Alcane

---

<div class="post-metadata">

**Author:** ![Petrakis](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/petrakis/32/256_2.png) [@Petrakis](https://forum.clockworkpi.com/u/Petrakis)\
**Post date:** [July 27, 2023, 5:02pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/4 "2023-07-27T17:02:28Z")

</div>

The uconsole modem is an USB modem, so you could disassemble any USB modem and solder the pins to the ext board slot

---

<div class="post-metadata">

**Author:** ![alcane](https://avatars.discourse-cdn.com/v4/letter/a/ed655f/32.png) [@alcane](https://forum.clockworkpi.com/u/alcane)\
**Post date:** [July 27, 2023, 5:38pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/5 "2023-07-27T17:38:20Z")

</div>

i have discovered this post and i have seen you are in :  
[https://forum.clockworkpi.com/t/ext-cartridge-module/8782/82](https://forum.clockworkpi.com/t/ext-cartridge-module/8782/82)

Any chance we can order it already ?  
Interesting the 2 ethernet and 1 console in rj45  
hope a modem could follow.

Thank you for your assistance 🙂  
Alcane

---

<div class="post-metadata">

**Author:** ![fip](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/fip/32/6958_2.png) [@fip](https://forum.clockworkpi.com/u/fip)\
**Post date:** [August 11, 2023, 5:19pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/6 "2023-08-11T17:19:56Z")

</div>

Hi Alcane,

Sorry for the delayed response, but I’ve been in the hospital for some time.  
I played with the idea of selling the design, I may be able to scratch together the money needed but I’d need yatli’s approval first. Haven’t heard from him in a long time, last thing I know is that he’s also busy right now.

Also worth mentioning is that I don’t have a source for a fitting fan,  
and the MIPI CSI routing may be throwing a wrench into my attempts to talk to a camera module. The software is currently next to non-existent also, which might not be a problem for USB cartridges but is needed for the printer cart.

Currently I am preoccupied with recovery tough, so I cannot promise anything in the next few weeks.

I mean I’d love to sell PCBs, but currently I am not able due to personal reasons and some design decisions that make a PCBway order difficult, so a revision 5 or a fork would be needed.

I’ll work on the project when I’m once again up for the challenge tough.  
What I can do is to ask yatli on his opinion of doing a production run.

Edit: I thought the 📧 icon meant this was a PM scope. Well it is what it is.

---

<div class="post-metadata">

**Author:** ![MHam68HC11](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/mham68hc11/32/5046_2.png) [@MHam68HC11](https://forum.clockworkpi.com/u/MHam68HC11)\
**Post date:** [August 12, 2023, 1:16am UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/7 "2023-08-12T01:16:19Z")

</div>

Get well ! focus on getting over what your dealing with - we have had a wide spread summer cold - lots of heavy congestion and coughing and its pretty contagious. Spouse had it first then the grand baby , then me then the adult grand daughter… fortunately using hand sanitizer and staying a distance from my co-worker - no one else got it but 90 miles away my elderly Mom also had it so we’ve had to stay away from folks for a bit.

---

<div class="post-metadata">

**Author:** ![GuardianZX9](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/guardianzx9/32/6858_2.png) [@GuardianZX9](https://forum.clockworkpi.com/u/GuardianZX9)\
**Post date:** [November 6, 2025, 1:48pm UTC](https://forum.clockworkpi.com/t/lte-modem-on-devterm/10587/8 "2025-11-06T13:48:11Z")

</div>

I would think you could use the UConsole LTE Modem on the DevTerm.
