# Memory card ejection **URL:** https://forum.clockworkpi.com/t/memory-card-ejection/5194 **Category:** GameShell **Tags:** tinkering **Created:** [January 22, 2020, 9:38pm UTC](https://forum.clockworkpi.com/t/memory-card-ejection/5194 "2020-01-22T21:38:01Z") **Posts on this page:** 1 **Showing post:** 2
### Author: ![javelinface](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/javelinface/32/3079_2.png) [@javelinface](https://forum.clockworkpi.com/u/javelinface) #### Post date: [January 23, 2020, 7:24am UTC](https://forum.clockworkpi.com/t/memory-card-ejection/5194/2 "2020-01-23T07:24:07Z")
Nice to see a hard mod example! Would it be possible with your mod to instead have a slit cut, instead of an entire wall edge removed? Mainly with regards to the durability of the modification you made to the SD card. There was a mod that was similar in principal, just having the SD card externalised. > [@How have you improved your Gameshell hardware?](https://forum.clockworkpi.com/t/how-have-you-improved-your-gameshell-hardware/4941): > > I thought I would share a couple of small improvements I’ve made to my Gameshell External reset button I described the process for this in a reply to a [relevant thread](https://forum.clockworkpi.com/t/reset-button-case-mod/3623/5) but it’s quite a simple mod. A small amount of case modding needed but it doesn’t mess with the case too much! Easier to access microSD slot This is one of my biggest complaints about the Gameshell – the fact that you have to basically fully disassemble everything to get to the microSD card. I bought a … --- _[View the full topic](https://forum.clockworkpi.com/t/memory-card-ejection/5194)._