# MicroPython command EDIT does not work **URL:** \ **Category:** PicoCalc\ **Created:** [February 14, 2026, 12:45pm UTC](https://forum.clockworkpi.com/t/micropython-command-edit-does-not-work/21536 "2026-02-14T12:45:36Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![tabemann](https://avatars.discourse-cdn.com/v4/letter/t/df705f/32.png) [@tabemann](https://forum.clockworkpi.com/u/tabemann)\ **Post date:** [February 14, 2026, 4:18pm UTC](https://forum.clockworkpi.com/t/micropython-command-edit-does-not-work/21536/2 "2026-02-14T16:18:30Z")
It is recommended that one not bother with the firmware that the PicoCalc ships with, and rather install new firmware on it. In this case, I would recommend installing the Picoware MicroPython port. See this thread: > [@Picoware (Open-Source Custom Firmware)](https://forum.clockworkpi.com/t/picoware-open-source-custom-firmware/18536): > > Hey! I created an open source firmware called “Picoware”. It has support for 4 languages/SDKs (MicroPython, Arduino IDE, CircuitPython, and C/C++ SDK) and already has many features included (social media, weather, GPS, Bluetooth functions, Games, Screensavers, WiFi functions, and more). Here’s the GitHub link: Let me know your thoughts and if you’re interested in helping. I’ll update this post with the latest release, which is currently MicroPython v2.1.0: Download the .uf2 from builds/Mic… --- _[View the full topic](https://forum.clockworkpi.com/t/micropython-command-edit-does-not-work/21536)._