# New PicoCalc not booting

**URL:** <https://forum.clockworkpi.com/t/new-picocalc-not-booting/17198>\
**Category:** PicoCalc\
**Created:** [May 1, 2025, 6:15am UTC](https://forum.clockworkpi.com/t/new-picocalc-not-booting/17198 "2025-05-01T06:15:27Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![guu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@guu](https://forum.clockworkpi.com/u/guu)\
**Post date:** [May 1, 2025, 6:51am UTC](https://forum.clockworkpi.com/t/new-picocalc-not-booting/17198/2 "2025-05-01T06:51:51Z")

</div>

> [@How to flash a new firmware?](https://forum.clockworkpi.com/t/how-to-flash-a-new-firmware/16376):
>
> Really new to firmware flashing on the Picocalc and waiting for it, i wonder how : Flashing a uf2 file to a pico1 Flashing a uf2 file to a pico2w (i got one to replace the pico1) Thanks ! blush

Try to flash a firmware for checking

> <https://github.com/clockworkpi/PicoCalc/blob/master/Bin/PicoCalc%20SD/firmware/PicoCalc_PicoMite_v1.0.uf2>

Assuming you are using PICO 1

- download the uf2
- press BOOTSEL on Pico and plug the Micro-usb cable into Pico too
- copy the uf2 into PICO,on windows there will be a new disk ,on linux there will be like /media/$USER/RPI-XXX
- once copying done, pico will reset automaticly, unplug the Micro-USB cable
- Plug USB type C cable into PicoCalc TYPE C port
- Press Power ON

Normally picocalc will boot up and you will see PicoMite prompt interface

if Not , double check the assembling carefully  
If still nothing happend

it’s time to send email to [help@clockworkpi.com](mailto:help@clockworkpi.com)

---

_[View the full topic](https://forum.clockworkpi.com/t/new-picocalc-not-booting/17198)._
