# Pico 2 W compatible with Pico calc?

**URL:** <https://forum.clockworkpi.com/t/pico-2-w-compatible-with-pico-calc/16351>\
**Category:** PicoCalc\
**Created:** [March 28, 2025, 4:10pm UTC](https://forum.clockworkpi.com/t/pico-2-w-compatible-with-pico-calc/16351 "2025-03-28T16:10:16Z")\
**Posts on this page:** 2\
**Page:** 3

<div class="post-metadata">

**Author:** ![metawops](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/metawops/32/11733_2.png) [@metawops](https://forum.clockworkpi.com/u/metawops)\
**Post date:** [May 31, 2025, 12:37pm UTC](https://forum.clockworkpi.com/t/pico-2-w-compatible-with-pico-calc/16351/41 "2025-05-31T12:37:40Z")

</div>

> [@Toml\_12953](#):
>
> and install as usual

As I’m totally new to the PicoCalc and never did this … how exactly does “usual” go?  
I’m sure this is documented somewhere. But where? If only the official ClockworkPi product page of the PicoCalc had this information! #sigh (Or linked, at least.)

EDIT:  
Ah, I found [this](https://forum.clockworkpi.com/t/how-to-flash-a-new-firmware/16376) and will read & try.

> [@How to flash a new firmware?](https://forum.clockworkpi.com/t/how-to-flash-a-new-firmware/16376):
>
> Really new to firmware flashing on the Picocalc and waiting for it, i wonder how : Flashing a uf2 file to a pico1 Flashing a uf2 file to a pico2w (i got one to replace the pico1) Thanks ! blush

---

<div class="post-metadata">

**Author:** ![tabemann](https://avatars.discourse-cdn.com/v4/letter/t/df705f/32.png) [@tabemann](https://forum.clockworkpi.com/u/tabemann)\
**Post date:** [May 31, 2025, 2:50pm UTC](https://forum.clockworkpi.com/t/pico-2-w-compatible-with-pico-calc/16351/42 "2025-05-31T14:50:04Z")

</div>

Don’t forget Forth, specifically zeptoforth, on the PicoCalc, as is detailed at [FORTH on the PicoCalc - #5 by tabemann](https://forum.clockworkpi.com/t/forth-on-the-picocalc/17330/5) – note that the relevant branch of the GitHub repo is at [GitHub - tabemann/zeptoforth at picocalc-devel](https://github.com/tabemann/zeptoforth/tree/picocalc-devel) with directions at [zeptoforth/USING\_THE\_PICOCALC.md at picocalc-devel · tabemann/zeptoforth · GitHub](https://github.com/tabemann/zeptoforth/blob/picocalc-devel/USING_THE_PICOCALC.md) .

While it requires a bit of setup at the moment, and is strictly speaking beta at the present, it is quite functional as it stands. I would highly recommend it to anyone who wants to get more out of their PicoCalc.

[Previous page](https://forum.clockworkpi.com/t/pico-2-w-compatible-with-pico-calc/16351.md?page=2)