# Picocalc pocket cover!

**URL:** <https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409>\
**Category:** PicoCalc\
**Tags:** hardware, 3dprinting, 3dmodel\
**Created:** [March 30, 2025, 8:32pm UTC](https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409 "2025-03-30T20:32:34Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![grizzlychair](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/grizzlychair/32/12067_2.png) [@grizzlychair](https://forum.clockworkpi.com/u/grizzlychair)\
**Post date:** [August 24, 2025, 10:20pm UTC](https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409/21 "2025-08-24T22:20:34Z")

</div>

I am beyond late to this but can you stick this to the back of the picocalc while you’re using it?

---

<div class="post-metadata">

**Author:** ![rockotiger](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/rockotiger/32/13086_2.png) [@rockotiger](https://forum.clockworkpi.com/u/rockotiger)\
**Post date:** [August 24, 2025, 10:29pm UTC](https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409/22 "2025-08-24T22:29:22Z")

</div>

Not with the one above, but you can with the one in this thread:

> [@3D Printable Cover for Picocalc](https://forum.clockworkpi.com/t/3d-printable-cover-for-picocalc/18726):
>
> This one snaps onto the Picocalc in reverse, like a graphing calculator. I had a long trip coming up and wanted something that I wouldn’t have to set down while on a plane or bus.

---

<div class="post-metadata">

**Author:** ![Erik\_Botta](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/erik_botta/32/13940_2.png) [@Erik\_Botta](https://forum.clockworkpi.com/u/Erik_Botta)\
**Post date:** [September 10, 2025, 2:26pm UTC](https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409/23 "2025-09-10T14:26:43Z")

</div>

Printed from transfluent PETG 0.2 layer and 0.4 hotend. For me really not good fit. Rails just need a lot of postprocessing and still too tight. So waste of poor petg ☹ .

 ![image](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/1/1c05d6c5bba6a00036db4702a7aadf41fa14fd9e.jpeg)

---

<div class="post-metadata">

**Author:** ![BlairLeduc](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/blairleduc/32/11808_2.png) [@BlairLeduc](https://forum.clockworkpi.com/u/BlairLeduc)\
**Post date:** [September 10, 2025, 9:44pm UTC](https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409/24 "2025-09-10T21:44:24Z")

</div>

I used JLCPCB to print this model using SLA(Resin). It came to less than CAD$5 shipped using my welcome coupons. I am very happy with the quality of the print.

I needed to sand down the rails depth and thickness but it fits great now. I also finished the part (sanded) but only put in reasonable effort so it wasn’t so rough. You can also get JLCPCB to finish it for you, but that cost more.

 ![IMG_0067 Medium](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/7/75e691edf7196cff5bfdb85ff8f6668215b7f7c9.jpeg)  
 ![IMG_0068 Medium](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/6/6784322ac9478fe84367642ab8146d2c9ff76a52.jpeg)

Ignore the finger prints!

---

<div class="post-metadata">

**Author:** ![Duewester](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/duewester/32/13262_2.png) [@Duewester](https://forum.clockworkpi.com/u/Duewester)\
**Post date:** [September 11, 2025, 12:05pm UTC](https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409/25 "2025-09-11T12:05:41Z")

</div>

I printed mine in PLA on an Ender 3 V3 SE, had to remove the rubber pads I had installed but otherwise works great. Nice fit.

[Previous page](https://forum.clockworkpi.com/t/picocalc-pocket-cover/16409.md?page=1)