# Problems with my 256 GB SD Card on Uconsole with CM5

**URL:** <https://forum.clockworkpi.com/t/problems-with-my-256-gb-sd-card-on-uconsole-with-cm5/20428>\
**Category:** uConsole\
**Tags:** hardware\
**Created:** [November 12, 2025, 6:56pm UTC](https://forum.clockworkpi.com/t/problems-with-my-256-gb-sd-card-on-uconsole-with-cm5/20428 "2025-11-12T18:56:04Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![MarkoeZ](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/markoez/32/12584_2.png) [@MarkoeZ](https://forum.clockworkpi.com/u/MarkoeZ)\
**Post date:** [November 12, 2025, 9:13pm UTC](https://forum.clockworkpi.com/t/problems-with-my-256-gb-sd-card-on-uconsole-with-cm5/20428/7 "2025-11-12T21:13:21Z")

</div>

For me everything worked after this. Only with a separate board though, i got the Rpi IO board.  
And i have the exact same CM5 as you.

> [@EEPROM config and the CM5 lite](https://forum.clockworkpi.com/t/eeprom-config-and-the-cm5-lite/19649/47):
>
> got it working: just by flashing again the bootloader via SDcard (Raspberry PI Imager) via a different board: [https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-boot-eeprom](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-boot-eeprom) Now without further changes everything is working - no config change nothing else..

---

_[View the full topic](https://forum.clockworkpi.com/t/problems-with-my-256-gb-sd-card-on-uconsole-with-cm5/20428)._