# uConsole 4G board schematic and mecanical drawings

**URL:** <https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361>\
**Category:** uConsole\
**Created:** [July 6, 2023, 2:06pm UTC](https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361 "2023-07-06T14:06:07Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![argz](https://avatars.discourse-cdn.com/v4/letter/a/d9b06d/32.png) [@argz](https://forum.clockworkpi.com/u/argz)\
**Post date:** [July 6, 2023, 2:06pm UTC](https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361/1 "2023-07-06T14:06:07Z")

</div>

Hi,  
I am currently designing an extension board which can replace Clockworkpi’s uConsole 4g board.  
I finished the schematic, but can not start the pcb, because can not find the mechanical drawing of 4g board.  
What I need:

1. Dimensions of 4g board pcb
2. Pinout of the connector
3. Position of 3.5mm jack.

Thanks!

---

<div class="post-metadata">

**Author:** ![USFrozen](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/usfrozen/32/7065_2.png) [@USFrozen](https://forum.clockworkpi.com/u/USFrozen)\
**Post date:** [July 6, 2023, 2:28pm UTC](https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361/2 "2023-07-06T14:28:22Z")

</div>

Keep in mind that the speakers run off that board as well so you will need a few extra traces and contact pads for that unless you dont need audio.

Refrence: see steps G and H1 here [uConsole/Clockwork\_uConsole\_Assembly\_Guidelines.pdf at master · clockworkpi/uConsole · GitHub](https://github.com/clockworkpi/uConsole/blob/master/Clockwork_uConsole_Assembly_Guidelines.pdf)

---

<div class="post-metadata">

**Author:** ![argz](https://avatars.discourse-cdn.com/v4/letter/a/d9b06d/32.png) [@argz](https://forum.clockworkpi.com/u/argz)\
**Post date:** [July 7, 2023, 8:10am UTC](https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361/3 "2023-07-07T08:10:32Z")

</div>

> [@USFrozen](#):
>
> see steps G and H1 here

Thanks, I saw this one (and only?) document. But there are no dimensions there, unfortunately.

---

<div class="post-metadata">

**Author:** ![wdouglass](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/wdouglass/32/6678_2.png) [@wdouglass](https://forum.clockworkpi.com/u/wdouglass)\
**Post date:** [July 7, 2023, 11:08pm UTC](https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361/4 "2023-07-07T23:08:23Z")

</div>

I hope this info is available soon, I’d love to try to fit a small sdr there!

---

<div class="post-metadata">

**Author:** ![Petrakis](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/petrakis/32/256_2.png) [@Petrakis](https://forum.clockworkpi.com/u/Petrakis)\
**Post date:** [July 8, 2023, 2:12pm UTC](https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361/5 "2023-07-08T14:12:51Z")

</div>

Probably is being held until a good portion of people receive their uConsoles, because you know what will happen, a bunch of counterfeits would appear on the market, before the uConsole hits the streets

---

<div class="post-metadata">

**Author:** ![MHam68HC11](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/mham68hc11/32/5046_2.png) [@MHam68HC11](https://forum.clockworkpi.com/u/MHam68HC11)\
**Post date:** [July 8, 2023, 3:28pm UTC](https://forum.clockworkpi.com/t/uconsole-4g-board-schematic-and-mecanical-drawings/10361/6 "2023-07-08T15:28:07Z")

</div>

it would be nice to have an 'experimental ’ compartment there