# uConsole Antenna Bracket (3D Model) **URL:** \ **Category:** uConsole\ **Tags:** tinkering, 3dprinting, 3dmodel\ **Created:** [February 13, 2025, 5:59am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693 "2025-02-13T05:59:48Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![paragonnov](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/paragonnov/32/10914_2.png) [@paragonnov](https://forum.clockworkpi.com/u/paragonnov)\ **Post date:** [February 13, 2025, 5:59am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/1 "2025-02-13T05:59:48Z")
I designed an antenna bracket for uConsole. The profile of the model is basically based on the Bamboo Lab P1S. To assemble this, you need two M4 bolts of more than 8mm and a super glue. The reason why superglue is needed is that the parts of the model are separated into two parts for improved printing quality for complex shapes. ![uConsole_antenna v67 1ant](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/4/4cb2badcf2e706c299163e47a36828fc3f1cba5c.jpeg) ![uConsole_antenna v67 2ant](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/1/1b1e8ff9888e1fb23abecafb0b15698bcfc799dd.jpeg) ![uConsole_antenna v67 3ant](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/1/1b3bf027a1c7311f0e5c09d8c5a3e7ccf3d94468.jpeg) ![uConsole_antenna v67 3ant flower](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/1/1c80067c05a27d6e258af9bb4729633e55f6287e.jpeg) **Model download** [https://makerworld.com/en/models/1103666#profileId-1122681](https://makerworld.com/en/models/1103666#profileId-1122681) ---
**Author:** ![white-round-square](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/white-round-square/32/10385_2.png) [@white-round-square](https://forum.clockworkpi.com/u/white-round-square)\ **Post date:** [February 13, 2025, 9:47am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/2 "2025-02-13T09:47:41Z")
> [@uConsole Mod Megathread](https://forum.clockworkpi.com/t/uconsole-mod-megathread/12227/51): > > Thought I would share my Audio/Wifi mod [https://luisrodriguez.tech/uconsole-cm5-upgrade-and-audio-fix/](https://luisrodriguez.tech/uconsole-cm5-upgrade-and-audio-fix/) ---
**Author:** ![kalabaddon](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/kalabaddon/32/10900_2.png) [@kalabaddon](https://forum.clockworkpi.com/u/kalabaddon)\ **Post date:** [February 17, 2025, 2:35am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/3 "2025-02-17T02:35:19Z")
This is really nice looking! can you include a single part version by any chance? I have support martial so can print as one piece fine I think? Also is the M4 the size of the antennas? or the replacement back screws to attach this over the back plate? Thanks for the work! it is awesome looking! ---
**Author:** ![Shayne\_Troxler](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/shayne_troxler/32/9522_2.png) [@Shayne\_Troxler](https://forum.clockworkpi.com/u/Shayne_Troxler)\ **Post date:** [February 17, 2025, 11:24pm UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/4 "2025-02-17T23:24:46Z")
Check the URL he gave in makerworld, a single part profile has been added. The M4 relates the the size of the screws. The flat head screws that come with the Uconsole are M4. The antennas should be of a SWR that is compatible with 2.5 and 5 gHZ. ---
**Author:** ![paragonnov](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/paragonnov/32/10914_2.png) [@paragonnov](https://forum.clockworkpi.com/u/paragonnov)\ **Post date:** [February 18, 2025, 2:15pm UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/5 "2025-02-18T14:15:06Z")
> [@uConsole antenna bracket for vileer's AIO Extension Board (3D Print)](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-for-vileers-aio-extension-board-3d-print/15749): > > I am designing an antenna bracket for vileer’s All-In-One(RTL-SDR/LoRa/GPS/RTC/USB Hub) Extension Board. Do you have any feedback for this? ---
**Author:** ![paragonnov](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/paragonnov/32/10914_2.png) [@paragonnov](https://forum.clockworkpi.com/u/paragonnov)\ **Post date:** [February 18, 2025, 5:12pm UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/6 "2025-02-18T17:12:28Z")
I uploaded new 3 variants. ---
**Author:** ![Pooky1306](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/pooky1306/32/9226_2.png) [@Pooky1306](https://forum.clockworkpi.com/u/Pooky1306)\ **Post date:** [February 19, 2025, 8:21am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/7 "2025-02-19T08:21:46Z")
They looks nice ! However there’s only a blank bracket on your link. ---
**Author:** ![paragonnov](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/paragonnov/32/10914_2.png) [@paragonnov](https://forum.clockworkpi.com/u/paragonnov)\ **Post date:** [February 19, 2025, 8:41am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/8 "2025-02-19T08:41:49Z")
![스크린샷, 2025-02-19 17.35.46](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/5/553dee1770780ab5057c324cc9a941a96fbce6e7.jpeg) ---
**Author:** ![Pooky1306](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/pooky1306/32/9226_2.png) [@Pooky1306](https://forum.clockworkpi.com/u/Pooky1306)\ **Post date:** [February 19, 2025, 8:57am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/9 "2025-02-19T08:57:11Z")
![image](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/f/fc5b9cd74b701e4fbd133d92ab9d52b83b69c48a.png) I’m more a prusa guy and not familiar with makerworld, I may have missed something. ---
**Author:** ![paragonnov](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/paragonnov/32/10914_2.png) [@paragonnov](https://forum.clockworkpi.com/u/paragonnov)\ **Post date:** [February 19, 2025, 9:02am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/10 "2025-02-19T09:02:33Z")
Oh, I wasn’t considerate. I’ll check it right away 😅 ---
**Author:** ![paragonnov](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/paragonnov/32/10914_2.png) [@paragonnov](https://forum.clockworkpi.com/u/paragonnov)\ **Post date:** [February 19, 2025, 11:10am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/11 "2025-02-19T11:10:24Z")
![image](https://canada1.discourse-cdn.com/flex029/uploads/clockworkpi/original/2X/e/e174f2c0ada4592028de8e4719c7f4827321be35.png) I uploaded STL 🙂 ---
**Author:** ![kalabaddon](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/kalabaddon/32/10900_2.png) [@kalabaddon](https://forum.clockworkpi.com/u/kalabaddon)\ **Post date:** [February 20, 2025, 3:56am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/12 "2025-02-20T03:56:09Z")
Rodger that! Gonna download his 3 antenna version however, that straight one and other angles is really nice! I got some generic amazon pigtail and antennas and they fit the hex slot perfectly! I see what you mean now that it is printed and assembled. I just need to find a GPS antenna now. I thought a generic antenna would work, but seems like it may be a bad idea to test it with anything but an offical gps antenna since they seem to have some more to them then just an antenna. edit: I am slow, thanks for adding the single part version! I see now what you ment. I was able to kinda sort make it work in the slicer using the cutting tool and merge tool before I noticed your fix. ---
**Author:** ![kalabaddon](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/kalabaddon/32/10900_2.png) [@kalabaddon](https://forum.clockworkpi.com/u/kalabaddon)\ **Post date:** [February 20, 2025, 3:56am UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/13 "2025-02-20T03:56:44Z")
Great looking! thanks for the all the options and updates! ---
**Author:** ![Andy\_Wong](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/andy_wong/32/14971_2.png) [@Andy\_Wong](https://forum.clockworkpi.com/u/Andy_Wong)\ **Post date:** [February 13, 2026, 10:42pm UTC](https://forum.clockworkpi.com/t/uconsole-antenna-bracket-3d-model/15693/14 "2026-02-13T22:42:22Z")
do it! Hacker Gadget went full retard on my order when I purchased the AIO v.2 with both antenna pack and mounting bracket.