# Uconsole with ac1200 and HaLow wifi

**URL:** <https://forum.clockworkpi.com/t/uconsole-with-ac1200-and-halow-wifi/23240>\
**Category:** uConsole\
**Created:** [August 28, 2026, 6:16pm UTC](https://forum.clockworkpi.com/t/uconsole-with-ac1200-and-halow-wifi/23240 "2026-08-28T18:16:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lowprofile197](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/lowprofile197/32/17565_2.png) [@Lowprofile197](https://forum.clockworkpi.com/u/Lowprofile197)\
**Post date:** [August 28, 2026, 6:16pm UTC](https://forum.clockworkpi.com/t/uconsole-with-ac1200-and-halow-wifi/23240/1 "2026-08-28T18:16:12Z")

</div>

I am trying to make a wifi tester with the uconsole, but before i tinker myself, i like to know if anybody has tips for installing 2 wifi dongles. The aiov2 with ac1200 is already in. Also the battery board with pcie/nvme but that route does not seem easy.

inboard would be the preferred route, 3d printer backplate is possible to make.

also a lorawan TTN is on the wishlist​😇

---

<div class="post-metadata">

**Author:** ![bryank7bat](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/bryank7bat/32/17614_2.png) [@bryank7bat](https://forum.clockworkpi.com/u/bryank7bat)\
**Post date:** [August 29, 2026, 5:36pm UTC](https://forum.clockworkpi.com/t/uconsole-with-ac1200-and-halow-wifi/23240/2 "2026-08-29T17:36:58Z")

</div>

Do you want 2 boards inside such to use the two USBC that are in side the case? I have the 7 antenna card, and all may cables are clean under the ribbon cables. For an extra card you need a thin 90 right or left to snake to the card where you have room for it. Not alot of room in there so if I am running extra wifi I do it from USB outside or USBC hub (heap) to external card. Atlease then I can get some distance from the antennas.