# UF2 Loader release

**URL:** <https://forum.clockworkpi.com/t/uf2-loader-release/18479>\
**Category:** PicoCalc\
**Created:** [July 8, 2025, 1:26pm UTC](https://forum.clockworkpi.com/t/uf2-loader-release/18479 "2025-07-08T13:26:49Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![pelrun](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/pelrun/32/12323_2.png) [@pelrun](https://forum.clockworkpi.com/u/pelrun)\
**Post date:** [July 8, 2025, 1:26pm UTC](https://forum.clockworkpi.com/t/uf2-loader-release/18479/1 "2025-07-08T13:26:49Z")

</div>

The SDBoot/multi\_booter bootloader that @adwuard and @guu amongst others have done a bunch of work on is fantastic but it has a couple of glaring limitations that I couldn’t tolerate:

1. It requires recompiling every application with a custom linker script
2. It only reads .bin files instead of the usual .uf2 format, so various platform safety features are lost

UF2 Loader is a reworked version of the bootloader that fixes these two issues. Just stick (almost) any uf2 file you like onto the SD card, and this loader can use it directly.

If an application is loaded, it will automatically boot unless UP, F1 or F5 is held during power on. The first entry in the file list (shown in square brackets) will show the filename of the loaded application if one is present, and will boot to it directly without reflashing if selected.

Holding DOWN or F3 during power-on instead will put the Pico into BOOTSEL mode if you need it.

There is also a simple diagnostic tool in case you can’t successfully get the menu to appear - it checks that the SD card can be successfully mounted and the BOOTnnnn.UF2 file is present and can be read.

To install uf2loader you need to flash the appropriate bootloader.uf2 for your pico model in bootsel mode, copy both BOOT\*.UF2 files to the root of your sd card, make pico1-apps and pico2-apps folders on the sd card, and stick your desired applications in those folders.

NOTE: old builds of PicoMite/WebMite and micropython are incompatible with uf2loader. For now, use PicoMite from my GitHub repo, and jblanked’s micropython picoware.

> **[GitHub - pelrun/uf2loader: Bootloader that loads firmware from PicoCalc's SD...](https://github.com/pelrun/uf2loader)**
>
> Bootloader that loads firmware from PicoCalc's SD card Slot.

> **[Releases · pelrun/uf2loader](https://github.com/pelrun/uf2loader/releases)**
>
> Bootloader that loads firmware from PicoCalc's SD card Slot. - pelrun/uf2loader

---

_[View the full topic](https://forum.clockworkpi.com/t/uf2-loader-release/18479)._
