# WiFi scan shows no APs

**URL:** <https://forum.clockworkpi.com/t/wifi-scan-shows-no-aps/3957>\
**Category:** GameShell\
**Created:** [July 1, 2019, 9:24pm UTC](https://forum.clockworkpi.com/t/wifi-scan-shows-no-aps/3957 "2019-07-01T21:24:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SirDeath](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/sirdeath/32/2776_2.png) [@SirDeath](https://forum.clockworkpi.com/u/SirDeath)\
**Post date:** [July 1, 2019, 9:24pm UTC](https://forum.clockworkpi.com/t/wifi-scan-shows-no-aps/3957/1 "2019-07-01T21:24:39Z")

</div>

I don’t find any WiFi APs when I scan despite having at least 2 in my house. All other WiFi devices in my house find both APs just fine, but on clockworkpi, nothing! No network names or anything found. I can find the APs at my office with clockworkpi, but they use Enterprise authentication and won’t work for other reasons. My home wifi just shows nothing every time I scan for wifi networks…nothing. I looked in the forums and wrote a new SD image but still no joy. I tried a new SD card but no joy. I dis-assembled everything and re assembled, but still no joy. I tried connecting a wired USB ethernet connecter, but when I try to update I get the error to check wifi. The wired ethernet is active according to my APs hard wired ports, but still can’t talk over the network. Any ideas why I can’t find anything? My home access points are linksys wrt1900acsv2 s both running the latest DD-WRT

---

<div class="post-metadata">

**Author:** ![Tariq](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.clockworkpi.com/tariq/32/2763_2.png) [@Tariq](https://forum.clockworkpi.com/u/Tariq)\
**Post date:** [July 1, 2019, 9:56pm UTC](https://forum.clockworkpi.com/t/wifi-scan-shows-no-aps/3957/2 "2019-07-01T21:56:14Z")

</div>

Try resetting the motherboard

---

<div class="post-metadata">

**Author:** ![ITCactus](https://avatars.discourse-cdn.com/v4/letter/i/b2d939/32.png) [@ITCactus](https://forum.clockworkpi.com/u/ITCactus)\
**Post date:** [July 1, 2019, 10:09pm UTC](https://forum.clockworkpi.com/t/wifi-scan-shows-no-aps/3957/3 "2019-07-01T22:09:39Z")

</div>

make sure, your home WiFi APs are in 2.4 mode,  
because CPI does not support (can’t “see”) 5GHz band