I have installed a Pimoroni PicoPlus2W board on my PicoCalc. After loading PicoMite_PICO2_V6.00.03_PicoCalc.uf2 (and its WebMite version), I get the following message on the screen: I2C Keyboard not found, OPTION KEYBOARD disabled. What is happening?
try the nuke.uf2 first then reinstall webmite
Now I have a question: are there different versions of PicoCalc? On the ClockWorkPi website, they advertise version 2. Is that because it has a Pico 2, or because it is new hardware?
No, it still comes with the Pico 1H.
They say it has the ClockworkPi v2.0 mainboard, but I could not find what the difference is.
My PicoCalc is from way back in April, says CPI2.0 on the board, never heard of a 1.0 so probably never left the bench.
Yes use flash nuke from Raspberry themselves. Note .uf2 Picomite/MMBasic images from the backshed forum WILL NOT work as is on the PicoCalc !
https://www.raspberrypi.com/documentation/microcontrollers/pico-series.html#resetting-flash-memory
It’s just v2.0, like how the uconsole and devterm used v3.14.
If they have different board versions they get added as an extra version number, devterm originally shipped with a clockworkpi v3.14 v4 and later a v5 board.
It’s all quite confusing.
1 Like