Hello. Please help, HG uConsole Adapter Boards does not work.
I have two HG Adapter boards, one from HG shop, another from other shop from EU. Both works, or more correctly, both cards does not work in same way.
uConsole in original configuration works fine. Core is RP5 CM 4GB Lite. SD card are 64GB A2.
As soon, as I replace original adapter card with HG adapter card, CM5 does not boot.
Console has no any other cards, only motherboard, battery card (no batteries), HG adapter card, RP Core CM5 4Gb Lite, external power connected (Laptop USB C PSU).
Screen turn on backlit and stays in this state forever. On cold boot, literally when all hardware cold, but again, very rarely,
I got output on screen:
My SD Card:
And this is end of boot process.
Here is some info when original adapter installed:
dragon@uConsole:~ $ vcgencmd bootloader_version
2026/10/30 20:55:54
version 42d1b6a942a00e0814415cee30d97b90a1ae394b (release)
timestamp 1793393754
update-time 1793882337
capabilities 0x0000007f
dragon@uConsole:~ $ sudo rpi-eeprom-config
[all]
BOOT_UART=1
POWER_OFF_ON_HALT=1
# Default BOOT_ORDER for provisioning
# SD → NVMe → USB → Network
BOOT_ORDER=0xf461
PCIE_PROBE=0
SD_BOOT_MAX_RETRIES=2
SD_QUIRKS=1
dragon@uConsole:~ $ cat /etc/os-release
PRETTY_NAME=“Debian GNU/Linux 13 (trixie)”
NAME=“Debian GNU/Linux”
VERSION_ID=“13”
VERSION=“13 (trixie)”
VERSION_CODENAME=trixie
DEBIAN_VERSION_FULL=13.7
ID=debian
dragon@uConsole:~ $ uname -a
Linux uConsole 7.1.4-v8+ #2 SMP PREEMPT Sun Jul 26 00:22:19 EDT 2026 aarch64 GNU/Linux
