A added at a first try and replaced the content by the config in your post: EEPROM config and the CM5 lite
You can see in the top the SD card appears as detected, which didn’t happen in my previous photo.
I didn’t apply any special config. I’m an old-school folk and I used dd to write the image:
dd if=ClockworkPi-Ubuntu-24.04-6.12.45.img | pv | sudo dd of=/dev/sdb
15967305+0 records inMiB/s] [ <=> ]
15967305+0 records out
8175260160 bytes (8.2 GB, 7.6 GiB) copied, 1322.9 s, 6.2 MB/s
7,61GiB 0:22:02 [5,89MiB/s] [ <=> ]
15967294+22 records in
15967305+0 records out
8175260160 bytes (8.2 GB, 7.6 GiB) copied, 1322.92 s, 6.2 MB/s
I used pv to get the status of writing and not lose my remaining sanity. ![]()
