uConsole CM5 (NVMe boot) — hard power-off on every reboot, only fixed by fully unplugging power

[white-round-square]

Finally: hard reset button fix

You need to remove R120 on the motherboard and solder copper wire between compute module 3.3V output and GND_VREF. Tested on rpi cm5 lite 16GB with Hackergadgets adapter board. [IMG_20260619_043623] [Screenshot_2026-06-19-04-34-45-42_3aea4af51f236e4932235fdada7d1643] [IMG_20260619_043344] [IMG20260619023636] [IMG_20260619_043407] [IMG20260619023406]