RTL-SDR Extension Board with USB HUB and RTC

[Rex]

in this post i linked a sd card that will work to get booted to do the eeprom change.

EEPROM config and the CM5 lite

With the upcoming release of NVME capable adapter boards from @vileer & @lululvlv I have changed up the EEPROM config to be able to use them. If you have a CM5 lite and are having problems with the sd card booting or have already updated the config but plan on getting a NVMe board. You need to edit your EEPROM and your CM5 lite has to have updated firmware that was released after 2025-01-06. Check using vcgencmd version to update sudo rpi-eeprom-update sudo rpi-eeprom-config -e To edit the eep…