Fixed my CM5 overheating problem with a riser and a thin thermal pad

[L_Huddy]

Here’s the thread showing the EVA gasket I made in case it helps…

Gasket fun - home made, works well with Waveshare board and keeps dust from inside

I have had my cover offset using washers and longer hex bolts so that there’s around a 2mm gap between it and the chassis of the uConsole. It stopped the rear cover from pushing against the boards inside, but I wanted something a bit neater. Having looked at gasket paper and messing with a 3D printed gasket solution, I came across some 2mm thick EVA foam sheets I had lying around from another craft project (available very cheaply online). So, as per the pics below, I used the rear cover as a te…